Clik here to view.
Issue - Navigation from OWL to QA screen
Hello All, I am trying to navigate from OWL UUID to QA screen, to achieve this I created Object based navigation screens. Settings are shown below in screen shot: Created OBN with Wizard Outport...
View ArticleRe: Reports/Input forms Unable to EDIT After Dimension Removal from Model
Are your input forms/reports password protected? Sheet options --> Protection? If the protection is on, the edit button will be seen disabled till the protection is set to "No protection" and...
View ArticleBack up error
We have Sybase having Error at the time of schedule back up. Backup Server: 4.55.2.1: Device validation error: couldn't open raw device /dev/rmt/0mn, error: No such device or address
View ArticleRe: QN long text in defect tab
Hi Everyone, While recording the defects through RR(QE01/02/51N), if user clicks the long text button from defects tab (after keying in the defect code) to enter the long text for the defect, we could...
View ArticleRe: Issue with Screen Handling at run time
Hi Fred and Stefan, Thanks for your suggestion. I am done with dropdown list and working on others.Meanwhile please advise on my another thread: Issue - Navigation from OWL to QA screen RegardsNitin
View ArticleStored Procedure Needed for Document Series Check
Hi Experts, While Doing procurement PO from SO, the Document Series in SO for Branchwise must be match with the PO ..While Prepaing PO Document from SO , If there is mismatch of...
View ArticleRe: Reconciliation accounts in asset accounting for different depreciation areas
Hi Marianna, No, the APC & accumulated depreciation GL accounts should be a reconciliation accounts. Regards,Mukthar
View ArticleAggregations in viz control
The api documentation says for FeedItem:new sap.viz.ui5.controls.common.feeds.FeedItem(sId?, mSettings?)The supported settings are:Propertiesuid : stringtype : stringvalues :...
View ArticleRe: Can RERAPP can be executed on Reference flow Types.
Hi Khandelwal, If you want to post the incremental condition then ref. flow type 10 will helps you.you can do assignment in config accordingly. Even if you do config for ref flow type 20 also, it will...
View ArticleRe: couldnt connect to one of the clustered server box through thick clients.
This problem is only with client tools web apps are fine
View ArticleRe: FERT BOMs that contain FERT components
Hello Chris, Please check OSS 100261 which clearly states that serialized components can not be used for back flushing in REM. Regards,
View ArticleClik here to view.
Re: BPC 10.0 for Excel version - Combining a descriptions of the two...
Hi Renne, When building a report from the beginning that there is such a formula= EPMOlapMemberO("[ZBPTEPCALC].[PARENTH1].[KE01.08.02]";"";"ke01.08.02";"";"000")and we get this report here I need to,...
View ArticleRe: Extract list of Scheduling Agreements for a Vendor containing BED,ECESS...
Why dont you check it out EKPO table where you can get the Scheduling agreement number and tax code for line items.
View ArticleRe: beforeShow event being wrongly called?
Hi Santhosh, For me, the onInit is working fine, as you have suggested. But when I call another item, I would like to know how I can get the next value to show in the detail page in a splitapp.
View ArticleRe: PM Module: BAPI to change Maintainance Plan's Cycle and its Unit
Hi, Can you let me know the Test Directory of MPLAN_CHANGEregarding my scenario. I just want to change only Cycle and Unit. With Regards,Sudhir.
View ArticleClik here to view.
Re: Parameters not consistent 1 in WO-EWM
Hi! Check note:1791792 - Error /SCWM/WM_SEL001 when confirming or creating WTYour error req. debuggingBR, Alex.
View ArticleRe: FMS - Goods Issue drafkey
Hi, Try this: SELECT T0.[DocEntry] FROM ODRF T0 WHERE T0.[DocNum] =$[$7.0.0] and t0.objtype = 60 Thanks
View ArticleRe: Product has no Shipper
Please maintain a Business partner in the shipping point[loc type 1003] in TM. This BP will become the shipper for this order.
View ArticleRe: Repartitioning of a cube - Options
Hi Sreekanth, Check the users, how many years data is required in cube. I believe it is now 4 years data, based on users response. Let's move 2 years old data to another cube (call it as...
View ArticleRe: PICK PACK and PASS Process in RFUI for MFS
Hi! Did you set start and end bin in tr. /scwm/seba ? BR, Alex.
View Article